News

Inspection And Measurement Of Engine Piston Excavator

The Reason Of Caterpillar Excavator Electronic Maintenance Tool Does Not Communicate With ECM

As we all know, the walking part of excavator is mainly composed of driving wheel, carrier sprocket, roller, guide wheel and track. It is necessary to operate and walk every time. Therefore, after running for a certain period of time, these parts will wear to varying degrees. I would like to share with you a few daily maintenance methods, which can reduce the wear of excavator track and avoid futu

The assembling quality of fuel injection pump plays a decisive role in the difficulty of calibration and adjustment. Most of the faults and rework found in the verification are caused by poor assembling quality. Therefore, the assembling process should be carefully and repeatedly checked, and the defects found should not be left to be eliminated during the calibration.

If the excavator moves slowly, we need to find out the reason according to the specific situation. Next, I will tell you several reasons for the slow action of the excavator:

What Are The Treatment Methods For The Whole Excavator Flooded By Water

With the arrival of December, many areas have begun to snow, and the owner of the project will often be difficult to start the excavator, and the problem of fire is not good. In fact, there are many reasons for the poor ignition of excavators in winter, such as: incorrect fuel grade, low temperature, poor atomization of nozzles, battery power shortage, etc. One of the most common reasons for th

What should I do if the Komatsu PC200-8 excavator Bucket Cylinder is naturally reduced?

What are the treatment methods for the excavator machine being flooded?